Suzuki Jimny HJ
Lifted, widened and protected for the long term. A Jimny for terrain and everyday life.
Year
2024
Engine
1.5 l petrol
Power
75 kW / 102 hp
Drivetrain
Selectable four-wheel drive with low range
More off-road capability for everyday driving
This Suzuki Jimny HJ got a comprehensive upgrade from us, built for more off-road ability in everyday use: an adjustable lift suspension, the right wheel and tyre combination, a wider track and long-term corrosion protection.
The build in pictures
What is fitted to this vehicle
Tap a point in the photo.
- TREKFINDER lift suspension, 40 to 50 mm
- LegacyForged 16x8 with General Grabber AT3
- TREKFINDER track widening, 44 mm per axle
- TimeMAX cavity protection and underbody coating
The build in detail
Lift suspension and steering
At the centre is a TREKFINDER lift suspension with 40 to 50 mm more ground clearance and adjustable damping. It includes H&R coil springs, five-way adjustable KONI HT shocks, extended LUCAS braided brake lines and a TÜV parts certificate. Added to that: a reinforced TREKFINDER steering damper, a trailing arm bush set to correct the caster angle and an extensive wheel alignment.
Wheels and track
The Jimny now rolls on LegacyForged 16×8 alloy wheels with LT235/65 R16 General Tire Grabber AT3, including tyre pressure sensors. A TREKFINDER track widening kit of 44 mm per axle plus additional spacers gives it a wider stance.
Speedometer correction
Because of the new wheel and tyre combination, an electronic speedometer sender with a 6 percent correction was fitted and calibrated. The speedometer now shows the right speed again.
Protection and value
For long-term protection the Jimny got the TimeMAX short-wheelbase package with cavity protection and underbody coating.
Vehicle & build
The vehicle
| Model | Suzuki Jimny HJ (commercial vehicle) |
| Engine | 1.5 l petrol (K15B) |
| Gearbox | 5-speed manual |
| Drivetrain | AllGrip Pro, four-wheel drive with low range |
| Suspension | TREKFINDER +40 to 50 mm (firmness-adjustable) |
| Tyres | LT235/65 R16 General Grabber AT3 |
The build
- TREKFINDER suspension lift +40 to 50 mm, firmness-adjustable (H&R springs, KONI HT 5-way, LUCAS braided steel, TÜV parts certificate)
- Reinforced TREKFINDER steering damper
- Trailing arm bush set (caster angle) + wheel alignment
- LegacyForged alloy wheels 16×8 + LT235/65 R16 General Tire Grabber AT3 (with TPMS)
- TREKFINDER wheel spacers +44 mm per axle + spacer discs
- Electronic speedometer adjustment (6 percent correction)
- TimeMAX corrosion protection (cavity + underbody, short wheelbase)
A similar conversion for your vehicle
The Jimny is a good starting point. Tell us what you would like to take from it and what should be different.