Ford Ranger Raptor

The Raptor as a Delta4x4 Lil’ Beast, built into a touring vehicle with hardtop, kitchen and roof tent.

Year

2025

Engine

3.0 l V6 twin-turbo petrol

Power

215 kW / 292 hp

Drivetrain

Four-wheel drive with low range

From desert racer to overland tourer

From the factory, the Raptor is built to fly across rough terrain at speed. The Delta4x4 Lil’ Beast package lifts it and puts it on 35 inch tyres, and we added what a long trip needs: recovery at the front, lighting, a hardtop with kitchen, a roof tent and a drawer system with a fridge.

The build in pictures

What is fitted to this vehicle

Tap a point in the photo.

Ford Ranger Raptor front three-quarter view with hardtop and roof tent
1 / 7
  • Delta4x4 40 mm suspension lift kit
  • Delta4x4 Klassik_B with BFGoodrich KO3 35x12.5R18
  • RIVAL front bumper with WARN EVO 12s
  • Lazer Lamps Triple-R 850 in the grille
  • Front Runner Slimsport roof rack with Osram VX1000-CB
  • Alu-Cab Contour hardtop with kitchen module
  • Bush Company Alpha AX27 roof tent

The build in detail

Suspension and wheels

40 mm suspension lift kit from Delta4x4, with Klassik_B wheels on 35×12.5R18 BFGoodrich KO3 and 60 mm wider track front and rear. The speedometer calibration module corrects for the bigger tyres so the speedo reads true again. Underneath, TIMEMAX cavity sealing and underbody protection.

Front and recovery

RIVAL front bumper with a WARN EVO 12s, 5,443 kg pulling force and synthetic rope, protected by a battery isolator switch.

Light for the night

Behind the grille the Lazer Lamps kit with two Triple-R 850, on the Front Runner Slimsport roof rack an Osram VX1000-CB light bar.

Hardtop with kitchen

On the load bed the Alu-Cab Contour hardtop with kitchen module, on top the Bush Company Alpha AX27 roof tent.

Order in the load bed

A Decked drawer system with an ICECO fridge on the slide. Tools, recovery gear and supplies each have their place.

Vehicle & build

The vehicle

ModelFord Ranger Raptor
Engine3.0 l V6 petrol
PackageDelta4x4 Lil’ Beast
SuspensionDelta4x4 40 mm lift
WheelsDelta4x4 Klassik_B, BFGoodrich KO3 35×12.5R18
WinchWARN EVO 12s, 5,443 kg
HardtopAlu-Cab Contour with kitchen module
Roof tentBush Company Alpha AX27

The build

  • Delta4x4 40 mm suspension lift kit
  • Delta4x4 Klassik_B wheels with 35×12.5R18 BFGoodrich KO3
  • Delta4x4 speedometer calibration module
  • 60 mm wider track front and rear
  • Alu-Cab Contour hardtop with kitchen module
  • Bush Company Alpha AX27 roof tent
  • RIVAL front bumper with WARN EVO 12s (5,443 kg, synthetic rope)
  • Battery isolator switch and soft shackles
  • Lazer Lamps Triple-R 850 grille kit
  • Front Runner Slimsport roof rack with Osram VX1000-CB
  • Decked drawer system with ICECO fridge
  • TimeMAX cavity protection and underbody coating
  • TÜV approval

A similar conversion for your vehicle

The Raptor is a good starting point. Tell us what you would like to take from it and what should be different.