INEOS Grenadier
Built in a single job: suspension, winch, lights, underbody protection, roof rack with awning and a red and black wrap.
Year
2026
Drivetrain
Permanent four-wheel drive with low range
Type
Off-roader, five-door
Suspension
Koni Heavy Track Raid
Built complete in a single job
We built this 2026 Grenadier for travel and off-road use. It sits higher on LT285/70R17 BFGoodrich KO3, has a winch and auxiliary lights at the front, is protected underneath and carries a roof rack with an awning. All modifications are registered.
The build in pictures
What is fitted to this vehicle
Tap a point in the photo.
- Lazer Lamps Sentinel 7 Elite in the grille
- WARN VR EVO 12-S in the LETECH mount
- Koni Heavy Track Raid lift kit
- OZ Racing Rally Raid with BFGoodrich KO3 LT285/70R17
- Abenteuer4x4 stainless steel rock sliders
- Genuine INEOS snorkel
- Rhino-Rack Pioneer 6 with Backbone
- Rhino-Rack Batwing 270° awning
The build in detail
Suspension and wheels
Koni Heavy Track Raid front and rear with new springs lift the Grenadier. It rides on OZ Racing Rally Raid wheels in matt black with BFGoodrich KO3 in LT285/70R17. Afterwards we carried out a wheel alignment.
Winch at the front
The black LETECH mount carries a WARN VR EVO 12-S with 5,443 kg pulling power and synthetic rope. A battery isolator switch protects it, plus a Flatlink shackle mount.
Lights
Two Lazer Lamps Sentinel 7 Elite sit in the grille, wired to the high beam. STEDI side lights on the roof rails light up the area to the left and right of the vehicle.
Roof and awning
On the roof sits a Rhino-Rack Pioneer 6 platform with Backbone, with a Batwing 270° awning on the driver’s side. We added roof rail tubes in black.
Protection underneath
Stainless steel rock sliders from Abenteuer4x4 protect the sills. Underneath sits a 6 mm aluminium GorillaGuard Advanced skid plate set, plus steel guards for the engine and the rear bumper.
Rear and details
An Alu-Cab folding table is fitted in the rear door. We also added the genuine INEOS snorkel, a grab handle on the driver’s A-pillar and TimeMax cavity protection.
Vehicle & build
The vehicle
| Model | INEOS Grenadier |
| Type | Off-roader, five-door |
| Suspension | Koni Heavy Track Raid |
| Wheels | OZ Racing Rally Raid, BFGoodrich KO3 LT285/70R17 |
| Winch | WARN VR EVO 12-S, 5,443 kg |
| Lights | Lazer Lamps Sentinel 7 Elite |
| Roof | Rhino-Rack Pioneer 6, Batwing 270° awning |
| Approval | Registered |
The build
- Koni Heavy Track Raid front and rear with new springs
- OZ Racing Rally Raid Matte Black 17 inch with BFGoodrich KO3 LT285/70R17
- LETECH winch mount in black with WARN VR EVO 12-S (5,443 kg, synthetic rope)
- Battery isolator switch and Flatlink shackle mount
- Lazer Lamps grille kit with two Sentinel 7 Elite on the high beam
- STEDI MicroTouch side lights left and right
- Rhino-Rack Pioneer 6 platform with Backbone
- Rhino-Rack Batwing 270° awning on the driver’s side
- Roof rail tubes in black
- Abenteuer4x4 stainless steel rock sliders
- 6 mm aluminium skid plates GorillaGuard Advanced
- Steel guards for engine and rear bumper
- Genuine INEOS snorkel
- Alu-Cab folding table in the rear door
- Grab handle on the A-pillar
- TimeMax cavity protection
- Red and black wrap by a partner workshop
- Wheel alignment, technical inspection and registration
A similar conversion for your vehicle
The Grenadier is a good starting point. Tell us what you would like to take from it and what should be different.